Accurate parts matching
Read an OE part number and compare the listing with your vehicle before you inquire.
EV Knowledge Center
EV Academy
Practical Chinese EV education for repair shops, distributors, importers, fleet operators, and owners.
Latest Academy Articles
Funbyautoparts
Intake and Turbocharging3 min read
Dirty mass-airflow sensor: Motorservice SI0079 cautions against compressed-air cleaning
Motorservice SI0079 warns that compressed air can damage MAF sensing elements. Check contamination and related systems before deciding on replacement.
Read moreFunbyautoparts
Intake and Turbocharging3 min read
Leaking turbocharger hoses: diameter alone does not identify a replacement
After confirming a boost-hose leak, check material, shape and connections. Similar diameter does not establish a suitable replacement.
Read moreFunbyautoparts
Steering Systems3 min read
Loose steering and uneven tyre wear: inspect tie rods before relying on alignment
Steering play and uneven tyre wear need component checks as well as alignment assessment. Inspect tie-rod joints, connections and dust boots.
Read moreFunbyautoparts
Air Conditioning and Thermal Management3 min read
Electric A/C compressor oil: why a specified POE system cannot use a generic substitute
DENSO guidance for specified ND-oil 11 systems covers oil mixing and insulation risks. Refrigerant compatibility alone does not establish oil suitability.
Read moreFunbyautoparts
Ignition Systems3 min read
NGK spark plugs and anti-seize: read dry-installation and tightening requirements together
NGK guidance links dry installation to tightening conditions. Check seat type, threads and cylinder-head material rather than adding anti-seize.
Read moreFunbyautoparts
Cooling Systems3 min read
Slow coolant loss without an external leak: Motorservice SI1003 and the EGR cooler
Motorservice SI1003 highlights internal EGR-cooler leakage. Check the applicable cooling path before assuming a cylinder-head or gasket fault.
Read moreFunbyautoparts
Transmission and Driveline3 min read
Startup knocking and dual-mass flywheels: LuK says to inspect the starting system first
LuK 0104-PL calls for battery, starter and wiring checks before assessing a dual-mass flywheel. Startup noise alone does not justify ordering one.
Read moreFunbyautoparts
Engine and Timing3 min read
More vibration after selecting a gear: distinguish engine-mount types and faults
Separate vibration generation from its transmission to the body. Identify rubber, hydraulic or controlled mounts before defining repair scope.
Read moreFunbyautoparts
Wiring and Electrical Protection3 min read
Similar high-voltage connector colour and pin count: what else must be checked?
Check connector series, position assurance, HVIL functions and permitted vehicle repair scope. Similar appearance does not establish interchangeability.
Read moreFunbyautoparts
Wiring and Electrical Protection3 min read
GWM hybrid high-voltage harness shielding-ring recall: communication faults need diagnosis
Australian recall REC-006516 links inadequate harness shielding-ring grounding to control communication, torque and hybrid cooling concerns.
Read moreFunbyautoparts
Braking Systems3 min read
ATE coated brake discs: check Service-Information 200.001 before cleaning
ATE 200.001 distinguishes factory coating, initial bedding noise and coating residue. Follow the instructions for the actual coated disc.
Read moreFunbyautoparts
Braking Systems3 min read
ATE TD003 brake-cylinder paste: respect the application position and fluid system
ATE TD003 limits brake-cylinder paste to specified internal applications and fluid systems. Check material compatibility rather than treating it as grease.
Read more