This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fuel and Evaporative Emissions
2025 Tank 500 V6 Dual Injection: Keep Injection Identity Separate from Turbocharger Count
Retain the MY25 Tank 500 Luxury 3.0T V6 Dual Injection MHEV wording without inferring turbocharger or injector quantities.
A supplier asks for the engine version, but the job card says “3.0 twin turbo”. If that description came only from translating Dual Injection, correct it first. The Mexican 2025 Tank 500 Luxury factory wording is 3.0T V6 Dual Injection MHEV. Separating injection and boost descriptions helps avoid choosing the wrong parts from the powertrain name alone.
Dual Injection does not state turbocharger quantity
Dual Injection describes injection in the factory powertrain name; it must not be translated as Twin Turbo. [T06] The sheet does not further explain the injection layout, so this article does not infer fuel rail arrangements, injector quantity or fuel pressure. [To be verified]
Retain the complete powertrain wording and visible vehicle markings before purchasing. State whether the repairer has actually identified a fuel-system, boost-system or other concern. If only misfiring or changed power delivery has been reported, preserve original fault codes and operating conditions rather than inferring injector failure from the name.
The name cannot replace a fuel-system exploded diagram
3.0T, V6, Dual Injection and MHEV describe different aspects of identity. Retaining them together is more useful than selecting a familiar term. Supply levels for injection parts, lines and assemblies still require the appropriate catalogue and repair documentation. Equal displacement and cylinder count do not prove fitment.
Scope and verification
This article is limited to Mexico; MY25; GWM TANK 500; Luxury 3.0T V6 MHEV. [Model year and trim basis][T01] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Mexico.
For parts discussed here, use the parts enquiry page.
[T01]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/Legales_Oferta_comercial_abril2026.pdf
[T06]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/fichas/nueva-gwm-tank500-ficha-tecnica.pdf
Related Academy Articles
Fuel and Evaporative Emissions
2026 Tiggo 4 HEV EVAP software recall: check the remedy before ordering a canister or solenoid valve
New Zealand recall RCB-2605 concerns EVAP software on MY26 Tiggo 4 HEV. Separate the software remedy from hardware replacement.
Fuel and Evaporative Emissions
LDV DELIVER 9 Fuel Line Leakage: Identify the Section in the 2026 Recall
Keep the Australian DELIVER 9 low-pressure fuel line distinct from the high-pressure pump and use the replacement notice VIN list.
Fuel and Evaporative Emissions
Older Vision, GC7 and EC7 Fuel Pump Recall: Why Fuel Interruption Is More Than a Filter-Service Question
Separate filter maintenance from internal fuel-pump wear and the improved-pump remedy in the historical Chinese Vision, GC7 and EC7 recall.