This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Suspension and Dampers
2026 Tank 300 Front Double-Wishbone Suspension: Identify the Actual Control Arm Required
Retain the MY26 Tank 300 Luxury double-wishbone description and identify axle, side and damage before selecting a control arm.
After an impact near a front wheel, an owner may point underneath and ask to replace “that arm”. Incomplete photos can still leave purchasing with the wrong location. The Mexican 2026 Tank 300 Luxury factory sheet describes double-wishbone front suspension. Retain the full construction name, then let the repairer confirm the exact component rather than relying on a colloquial label.
A construction field is not an individual part name
The front suspension line reads Doble horquilla. [T04] This article uses only that confirmed front suspension description. It is not the name of a particular control arm, and rear suspension information does not identify front parts.
Records may include the front axle, vehicle left or right side, wide and close-up damage photos, and visible assembly markings. Describe noise, uneven wear and impact damage separately so the repairer can inspect actual damage. The construction sheet does not prescribe which arm to replace whenever any such symptom occurs.
Do not assume bushes or ball joints are available separately
The double-wishbone name provides no catalogue breakdown of arms and connections, inspection clearances or fastening parameters. Visible mounting arrangements do not prove that bushes or ball joints can be replaced separately. Similar appearance does not justify substituting front suspension parts from another pickup. [To be verified]
Scope and verification
This article is limited to Mexico; MY26; GWM TANK 300; Luxury 2.0T HEV. [Model year and trim basis][T01] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Mexico.
For parts discussed here, use the parts enquiry page.
[T01]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/Legales_Oferta_comercial_abril2026.pdf
[T04]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/fichas/gwm-tank300-ficha-tecnica-2026.pdf
Related Academy Articles
Suspension and Dampers
2025 T60 MAX Rear Suspension Parts: Separate Leaf-Spring and Multi-Link Requirements
Distinguish MY25 T60 MAX Pro leaf-spring rear suspension from Plus and Mega Tub Plus multi-link equipment before choosing parts.
Suspension and Dampers
2026 MGU9 EV axle loads: 1600kg and 2100kg do not add up to a new vehicle load allowance
Distinguish Australian MY26 MGU9 EV axle limits of 1600kg and 2100kg from 3500kg GVM before identifying suspension accessories.