This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Suspension and Dampers
2026 MGU9 EV axle loads: 1600kg and 2100kg do not add up to a new vehicle load allowance
Distinguish Australian MY26 MGU9 EV axle limits of 1600kg and 2100kg from 3500kg GVM before identifying suspension accessories.
When selecting suspension accessories, adding front and rear axle limits and treating the sum as permissible vehicle mass distorts the load record. The Australian 2026 MGU9 EV manufacturer lists separate front axle, rear axle and vehicle GVM figures. Keeping these constraints separate helps avoid selecting chassis parts from an added total.
Each figure applies to a different object
The specification gives a front axle load limit of 1600kg, a rear axle limit of 2100kg and GVM of 3500kg.[T14] Adding the axle figures does not create a new permissible total vehicle mass or establish a spring or damper’s rated capacity.
For a suspension accessory enquiry, retain the actual use, existing accessories and vehicle and axle mass records obtained by a suitable method. Cargo weight alone does not fully describe front/rear distribution. Vehicle ride height cannot replace weighing or suspension inspection.
The axle-load table does not authorise an upgrade
These manufacturer limits provide no suspension modification parameters and do not establish that stiffer parts increase GVM. This article does not use them to recommend springs or air suspension accessories. Actual parts selection and permitted loads need confirmation against vehicle identity, corresponding technical information and local requirements.
Scope and verification
This article covers only Australia; MY26; MG MGU9 EV; the configuration listed in the manufacturer’s MY26 specification table, with no separate trim level named.[Scope reference][T14] The cited product specifications identify functions and parts; they are not fault or replacement criteria.
No public data was available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility/interchangeability. [To be verified] Check compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
Related Academy Articles
Suspension and Dampers
2025 T60 MAX Rear Suspension Parts: Separate Leaf-Spring and Multi-Link Requirements
Distinguish MY25 T60 MAX Pro leaf-spring rear suspension from Plus and Mega Tub Plus multi-link equipment before choosing parts.
Suspension and Dampers
2026 Tank 300 Front Double-Wishbone Suspension: Identify the Actual Control Arm Required
Retain the MY26 Tank 300 Luxury double-wishbone description and identify axle, side and damage before selecting a control arm.