OMODA 5 rear-axle recalls: distinguish the actions before ordering an assembly

OMODA 5 rear-axle recalls: distinguish the actions before ordering an assembly

If an OMODA 5 rear-axle inspection notice arrives, do not order an assembly directly from an old news report. The Malaysian actions have different published scopes. Identify the action and the replacement requirement after inspection before defining the parts need.

The actions have different scopes

Both sources concern Malaysia only. The public information is below. The component-batch dates in the 2024 material concern rear-axle parts, not whole-vehicle model years or production dates.

| Manufacturer information | Published scope | VIN verification |
| --- | --- | --- |
| 2024-05-04 statement | 60 vehicles identified with affected components from the 2023-08-15 batch; inspection expanded to 600 vehicles with rear axles from batches 08-14 to 08-17 | Manufacturer VIN enquiry and authorised service centre |
| 2026-10-14 customer guidance | OMODA 5 C and H versions, 8,878 vehicles | Manufacturer explicitly requires VIN-based eligibility checks |

Neither source provides a continuous VIN interval for direct quotation. No public data were available for whole-vehicle model years. [To be verified] Use the [Chery Malaysia official enquiry page][S22]; counts or component batches cannot replace an individual result. [2024 statement][S09], [2026 guidance][S10]

The 2024 welding explanation does not automatically explain the 2026 action

The 2024 manufacturer explanation traced the issue to a calibration deviation after a supplier changed a welding-equipment tip and identified component batches. [2024 technical explanation][S09] The 2026 customer guidance describes vehicle scope and inspection/replacement arrangements but does not state the specific defect cause. [2026 customer guidance][S10]

Mention of rear axles in both actions does not establish the same parts batch or failure mechanism. A purchasing error would be to use early defect photographs or batch descriptions directly as the assembly-selection basis for a current vehicle.

Establish inspection findings before preparing a complete list

The 2024 manufacturer FAQ describes replacement of the affected faulty rear axles and provides a rear-axle inspection checklist. These are the measures for that action. [Historical FAQ][S21] They cannot replace a specific vehicle's 2026 repair plan.

A workshop requesting an axle should identify the current action, inspection findings and replacement parts determined by the authorised organisation. A campaign name without an associated remedy decision does not establish that all accessories are replaced with the assembly. Similar appearance also cannot establish that an older axle is a direct substitute.

Verification and parts enquiry

The above is limited to Malaysia and is not extended to other markets. No public data were available for the specific 2026 defect cause, complete revised-parts list, OE numbers or technical relationship with the 2024 action. [To be verified] Affected vehicles should use the official recall channel. Parts compatibility or interchangeability still requires the VIN and local factory parts catalogue.

For separate ordinary rear-axle component needs, use the parts enquiry page.

[S09]: https://www.chery.my/2024/05/04/chery-auto-malaysia-mobilises-precautionary-measures-to-uphold-customer-safety/
[S10]: https://www.chery.my/2026/10/14/kempen-panggil-semula-omoda-5-chery-auto-malaysia-panduan-pelanggan/
[S21]: https://www.chery.my/wp-content/uploads/2024/05/Website-FAQ-Omoda-5-Rear-Axle.pdf
[S22]: https://www.chery.my/chery-product-update