This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Lamps and Lighting
2026 Tiggo 9 mirror puddle lights: distinguish them from mirror indicators
Australian MY26 Tiggo 9 lists mirror puddle lights and integrated indicators separately. Identify the function and position before selecting parts.
2026 Tiggo 9 mirror puddle lights: distinguish them from mirror indicators
Ground illumination near an open door has changed, but the request is written as “mirror indicator”. For the Australian MY26 Tiggo 9, distinguishing ground illumination from turn indication helps identify the relevant lamp position.
The factory names the two lighting functions separately
Page 5 lists Puddle Lights (Outside Mirrors) and separately lists indicators integrated into the exterior mirrors, with corresponding entries for both trims. [Factory equipment][S03] Lights near the same mirror do not necessarily have the same parts-supply identity.
The puddle-light description does not disclose a projection pattern, light-source type or independent module structure. Parts records should stay within the confirmed functional identity.
Use a wider photograph to distinguish lamp positions
Identify the left or right side and photograph the complete mirror, the intended lamp and visible damage. If the request concerns changed illumination, retain original messages and the circumstances. Failure to see the expected light on the ground does not itself identify a failed mirror assembly or control component.
Once the workshop confirms the item, match its identification to the location. If an indicator or mirror housing also needs attention, list it separately. This keeps different requirements around the same mirror clear.
The additional Tiggo 9 restriction is the factory specification for production from Jan 2026. This production restriction does not replace the explicit MY26 designation.
Scope and verification
This article is limited to Australia, MY26, Chery TIGGO 9, Super Hybrid Elite and Super Hybrid Ultimate; specifications for production from Jan 2026 only. [Model year and configuration][S03] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for puddle-light operating conditions, light source and mounting structure, supply relationship with the indicator, wiring and test values; OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Australia.
For parts discussed here, use the parts enquiry page.
[S03]: https://cherymotor.com.au/sites/default/files/2026-05/271_25_Tiggo_9_PHEV_Spec_Sheet_v104.pdf
Related Academy Articles
Lamps and Lighting
2026 Tiggo 8 headlight height adjustment: separate the screen setting from automatic high beam
Australian MY26 Tiggo 8 Super Hybrid lists screen-based headlight height adjustment and IHC separately. Preserve the specific lighting request.
Lamps and Lighting
2026 MGU9 load-bed lighting: check the LED tub lights by trim
Australian MY26 MGU9 LED tub lights are listed for Explore X, Black Edition and Explore Pro. Identify load-bed lighting separately from other lamps.