2026 Tiggo 8 headlight height adjustment: separate the screen setting from automatic high beam

2026 Tiggo 8 headlight height adjustment: separate the screen setting from automatic high beam

After loading luggage, the beam appears to point differently, and the driver also finds an automatic high-beam name in the menus. For the Australian MY26 Tiggo 8 Super Hybrid, distinguishing height adjustment from IHC makes the lighting inspection request more specific.

The factory lists height adjustment and intelligent high beam separately

Page 5 says Headlight Height Adjustment (Infotainment Screen) and separately lists Intelligent High Beam Control. [Factory equipment][S13] The former identifies a height-adjustment entry on the infotainment screen; the latter identifies the intelligent high-beam function. They should not be combined into the same operation.

A screen-based height setting does not mean the automatic-levelling sensors, actuators or acceptable beam limits have been publicly specified.

Describe the beam position before deciding on lamp replacement

Record the load at the time, visible settings, original vehicle messages and differences before and after repair. If there is external damage, add separate photographs of the lamp. Have the workshop check the beam or work on the lamp using the applicable information; subjective brightness or beam impressions alone do not establish component failure.

The purchasing request should identify the lamp position, function and confirmed item. Retain the original menu wording and list the workshop's findings separately to support later checks of the lamp and adjustment requirements.

Scope and verification

This article is limited to Australia, MY26, Chery TIGGO 8, Super Hybrid Urban and Super Hybrid Ultimate. [Model year and configuration][S13] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.

No public data were available in the reviewed material for height-adjustment positions and reference settings, internal actuators, automatic-levelling equipment, beam testing and parts-supply parameters; OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Australia.

For parts discussed here, use the parts enquiry page.

[S13]: https://cherymotor.com.au/sites/default/files/2025-12/246_25_Tiggo_8_PHEV_AU_Spec_Sheet_v107.pdf