This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Charging and Power Supply
2026 MGU9 EV V2L outlets: keep frunk, load bed and CCS2 ratings separate
Australian MY26 MGU9 EV lists 2.2kW frunk and load-bed outlets and 6.6kW at CCS2. Identify the outlet location without adding the ratings.
While organising camping power equipment, frunk and load-bed outlet requirements are combined as an “MGU9 discharge socket”. For the Australian MY26 MGU9 EV, identifying the location first helps specify the actual item requiring inspection or procurement.
The manufacturer lists the locations separately
Page 2 lists 6.6kW external power output through the CCS2 port, plus a frunk V2L 2.2kW outlet and light. Page 3 separately lists two load-bed V2L 2.2kW outlets.[Manufacturer technical table][R23] These are published item names and nominal output descriptions, not a vehicle power budget that can simply be added together.
Keep the frunk, load bed or CCS2 location in the parts request, with photographs of the actual outlet and its original markings. Avoid “the high-power one”, and do not combine charging cables, external power accessories and body-mounted outlets into one undifferentiated order.
An observation at one outlet does not diagnose the whole function
If an outlet does not supply power as expected, record the connected equipment, original warning and outlet used. Have the repairer inspect it using the vehicle information. This is easier to match to a physical object than immediately stating “external power module failed”.
Mark the actual outlet used in photographs and retain the complete original label. List CCS2-related accessories separately from frunk and load-bed body outlets so that subsequent findings and candidate parts can be matched individually.
Scope and verification
This article covers only Australia, MY26 MG MGU9, the separately listed MY26 MGU9 EV configuration; no additional trim name is given in the table; excluding diesel versions.[Scope reference][R23] The cited product specifications identify functions and parts; they are not fault or replacement criteria.
No public data was available in the reviewed material for shared output limits, simultaneous-use conditions, socket standards, adapters or circuit repair parameters; OE numbers, repair parameters, separate parts availability or compatibility/interchangeability. [To be verified] Check compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
Related Academy Articles
Charging and Power Supply
DC-DC and on-board charger quoted as one assembly: does integration require complete replacement?
Separate DC-DC and OBC functions, vehicle integration and service-parts scope before deciding on individual or complete assembly replacement.
Charging and Power Supply
2026 Tiggo 9 IC-CPD: identify portable charging equipment beyond a cable description
Australian MY26 Tiggo 9 lists IC-CPD / EV trickle charger equipment. Distinguish the portable device from a connecting cable or wall unit.
Charging and Power Supply
2026 Tiggo 8 and Tiggo 9 plug-in hybrid charge ports: confirm the driver or passenger side
Australian MY26 Tiggo 8 and Tiggo 9 charge ports occupy different rear sides. Retain the model and factory side description when selecting parts.