This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Charging and Power Supply
2025 D90 Mode Power Outlets: Retain Both 220V 150W and 12V 120W Ratings
Keep the MY25 D90 Petrol Mode 2WD outlet voltage and maximum power together when identifying sockets and accessories.
When looking for a supply for onboard equipment, seeing 220V can lead to choosing accessories as though the outlet were a household socket. For the Australian MY25 D90 Petrol Mode 2WD, read the voltage together with the published power marking to reduce incorrect socket or accessory enquiries.
Retain the factory limits for voltage and power
Page 4 lists one 12V outlet with a maximum of 120W and one 220V outlet with a maximum of 150W. [Factory specifications][R34] This article uses only the MY25 Petrol Mode 2WD column, without combining other trims or markets.
220V is the nominal description of an outlet, and its 150W limit must remain alongside it. Do not rewrite these figures as a multi-kilowatt V2L function from an electrified vehicle or infer which separately purchasable inverter it contains.
Match the complaint to a specific socket
Retain the actual location and photos of the socket and original label. Record the connected equipment and original vehicle messages. Distinguish visible interface damage from equipment failing to receive the expected supply; the latter requires diagnosis rather than a guessed converter module.
Keep socket location, 12V or 220V, original labelled power and connected-device details together in the selection record. The repairer's findings should identify the particular outlet before the purchasing scope is set for the socket, connections or another item.
Scope and verification
This article is limited to Australia; MY25 LDV D90; Petrol Mode 2WD, without extension to other trims. [Model year scope][R34] The cited product equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for the exact locations of both outlets, internal power-supply construction, operating conditions, protection strategy, separate supply and test values; OE numbers, repair parameters, separate parts availability, or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Australia.
For parts discussed here, use the parts enquiry page.
[R34]: https://imotor-cms-uploads.s3.ap-southeast-2.amazonaws.com/global__upYpYL5QTDesDkYFCdTdDK1t
Related Academy Articles
Charging and Power Supply
DC-DC and on-board charger quoted as one assembly: does integration require complete replacement?
Separate DC-DC and OBC functions, vehicle integration and service-parts scope before deciding on individual or complete assembly replacement.
Charging and Power Supply
2026 Tiggo 9 IC-CPD: identify portable charging equipment beyond a cable description
Australian MY26 Tiggo 9 lists IC-CPD / EV trickle charger equipment. Distinguish the portable device from a connecting cable or wall unit.
Charging and Power Supply
2026 Tiggo 8 and Tiggo 9 plug-in hybrid charge ports: confirm the driver or passenger side
Australian MY26 Tiggo 8 and Tiggo 9 charge ports occupy different rear sides. Retain the model and factory side description when selecting parts.