2025 IM6 charge port cover does not move: distinguish it from the connector lock

When preparing to charge, the outer cover fails to open as expected and the fault report says “charging lock broken”. On the Australian MY25 IM6, describing the powered charge port cover separately from charging connector locking directs repair and procurement to the step where the concern occurs.

The confirmed feature is a powered outer cover with an indicator

The technical table lists Intelligent Power Charge Port Cover (with Indicator Light) for all three trims.[Manufacturer table][Q06] This identifies cover and status indication functions. It is not a diagnostic explanation for the charging connector lock or OBC.

Record failure of the cover to open, a connection problem after it has opened, and unexpected indicator behaviour separately. They should not all be reduced to “cannot charge”.

Describe the action sequence without assuming an actuator

Useful information includes the command given, whether the cover began moving, where it stopped, any screen warning and previous repairs. Letting the technician continue inspection from these observations is more appropriate than immediately naming a motor.

The table does not explain the cover drive or locking structure. An indicator light does not establish that the lamp, controller or cover panel is necessarily supplied separately. [To be verified]

Identify the cover item rather than assuming fitment from photos

For cosmetic damage, specify whether it affects the panel, surrounding area or a mounting point confirmed by the repairer. For movement concerns, retain the diagnosis. Different requirements do not automatically call for the same assembly, and the shared IM model family does not establish interchangeability.

Scope and verification

This article covers only Australian MY25 MG IM6: Premium 75, Platinum 100 RWD and Performance 100 AWD. The cited feature and equipment information is not a fault or replacement criterion.[Scope reference][Q06]

No public data was available in the reviewed material for cover drive and locking structure, lamp/cover supply boundaries or emergency opening method; repair parameters, fault and replacement criteria, OE numbers, separate parts availability or interchangeability. [To be verified] Check compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.

For the parts discussed here, use the parts enquiry page.

[Q06]: https://mgmotor.com.au/brochures/MG_IM6_Brochure.pdf