This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Charging and Power Supply
2025 Cyberster boot 12V outlet: identify it separately from V2L accessories
Australian MY25 Cyberster lists a boot 12V outlet separately from V2L. Identify the intended location and function without assuming output limits.
An enquiry for power accessories for equipment in the boot alternates between “12V socket” and “V2L adapter”. For the Australian MY25 Cyberster, distinguishing the in-car outlet from the vehicle-to-load function helps match candidate accessories to the intended use.
The manufacturer lists two separate functions
On page 11, both trims list 12V Power Outlet (In Boot), with a separate Vehicle to Load Charging Function (V2L) entry.[Manufacturer specification][R01] This confirms the two function names only. The 12V outlet cannot be relabelled as an AC vehicle-to-load interface.
The 12V figure does not also provide this outlet's current or power limit. Values from another MG model cannot supply a missing accessory selection assurance. [To be verified]
A location photo is more specific than “for camping”
Retain the actual port location, label and required equipment details. State whether the concern is the original socket's appearance, an accessory or actual power delivery. Preserve any vehicle warnings rather than immediately identifying a failed power module.
The request can list the boot 12V outlet and V2L accessories separately, with actual use locations. For repair procurement, match the confirmed item to photos and original markings. “Camping power” should not become a shared name for several different parts.
Scope and verification
This article covers only Australia, MY25 MG Cyberster: 77kWh RWD and 77kWh AWD.[Model year scope][R01] The cited product specifications identify functions and parts; they are not fault or replacement criteria.
No public data was available in the reviewed material for 12V outlet current and power limits, connector structure, V2L accessory specifications, output conditions or circuit parameters; OE numbers, repair parameters, separate parts availability or compatibility/interchangeability. [To be verified] Check compatibility or interchangeability using the vehicle identification number (VIN) and the local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
[R01]: https://mgmotor.com.au/brochures/MG_CYBERSTER_2026_v2.pdf
Related Academy Articles
Charging and Power Supply
DC-DC and on-board charger quoted as one assembly: does integration require complete replacement?
Separate DC-DC and OBC functions, vehicle integration and service-parts scope before deciding on individual or complete assembly replacement.
Charging and Power Supply
2026 Tiggo 9 IC-CPD: identify portable charging equipment beyond a cable description
Australian MY26 Tiggo 9 lists IC-CPD / EV trickle charger equipment. Distinguish the portable device from a connecting cable or wall unit.
Charging and Power Supply
2026 Tiggo 8 and Tiggo 9 plug-in hybrid charge ports: confirm the driver or passenger side
Australian MY26 Tiggo 8 and Tiggo 9 charge ports occupy different rear sides. Retain the model and factory side description when selecting parts.