This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Charging and Power Supply
2026 Chery E5 AC charging: 6.6kW single-phase and 10.3kW three-phase do not identify separate OBCs
Retain supply conditions when reading MY26 Chery E5 Ultimate OBC data, and distinguish AC charging figures from DC fast charging.
2026 Chery E5 AC charging: 6.6kW single-phase and 10.3kW three-phase do not identify separate OBCs
Different AC charging behaviour at home and at a public charger can lead to an order describing onboard chargers with different power ratings. For the Australia MY26 Chery E5 Ultimate, retain the single-phase and three-phase conditions to align charging records with OBC identity.
The figures appear under the same OBC item
Page 3 lists the AC Onboard Charger as 6.6kW single-phase and 10.3kW three-phase. DC fast-charging data associated with CCS2 appear separately. [Factory technical table][S06] This does not publish separate independent chargers, and a DC station's power label cannot serve as the OBC specification.
Retain supply conditions with the vehicle configuration when identifying parts, rather than cropping out a power figure alone.
Charging context is more useful than a slow-charging description
Record whether the facility is AC or DC, equipment markings, original vehicle messages and the charging process on that occasion. If single-phase or three-phase status is unclear, leave it unknown. [To be verified] Do not infer household wiring construction or charger failure from observed behaviour.
If the repairer confirms an OBC-related parts need, include original-part identity and inspection findings. Factory data help identify input conditions; actual power falling below a table figure alone cannot determine assembly replacement.
Scope and verification
This article is limited to Australia; MY26; Chery E5; Ultimate. [Model year and configuration][S06] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for OBC part number, internal modules and parts-supply breakdown, input current and wiring, fault limits and substitution relationships; OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Australia.
For parts discussed here, use the parts enquiry page.
Related Academy Articles
Charging and Power Supply
DC-DC and on-board charger quoted as one assembly: does integration require complete replacement?
Separate DC-DC and OBC functions, vehicle integration and service-parts scope before deciding on individual or complete assembly replacement.
Charging and Power Supply
2026 Tiggo 9 IC-CPD: identify portable charging equipment beyond a cable description
Australian MY26 Tiggo 9 lists IC-CPD / EV trickle charger equipment. Distinguish the portable device from a connecting cable or wall unit.
Charging and Power Supply
2026 Tiggo 8 and Tiggo 9 plug-in hybrid charge ports: confirm the driver or passenger side
Australian MY26 Tiggo 8 and Tiggo 9 charge ports occupy different rear sides. Retain the model and factory side description when selecting parts.