This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Air Conditioning and Thermal Management
2025 Tank 500 Rear Automatic Air Conditioning: Separate Controls from Air Outlet Locations
Keep MY25 Tank 500 Luxury rear automatic climate control distinct from console and roof outlets without inferring system quantities.
Rear passengers report that “the rear air conditioning is wrong”. One person proposes an outlet, another asks about controls: the problem has not yet been defined. The Mexican 2025 Tank 500 Luxury factory sheet lists rear automatic air conditioning separately from front dual-zone automatic air conditioning. Distinguishing control functions from airflow locations makes the repair requirement more specific.
Rear equipment includes more than an outlet entry
The sheet lists Aire acondicionado con control automático trasero; another page places rear outlets on the centre console and roof. [T06] Record the rear control function, centre outlets and roof outlets separately rather than using “rear air conditioning” for all locations.
State whether rear settings or displays behave as expected, which outlet location has different airflow, and whether odours or unusual noises occur. These are symptom records, not conclusions that the existence of rear automatic control proves a particular sensor or actuator fault.
Do not infer an independent refrigeration system
The sheet does not fully define rear temperature zones or give compressor, evaporator or pipe quantities. Rear automatic air conditioning therefore does not establish a separate independent refrigeration system. Changed airflow at an outlet does not justify specifying replacement of a complete assembly. [To be verified]
Scope and verification
This article is limited to Mexico; MY25; GWM TANK 500; Luxury 3.0T V6 MHEV. [Model year and trim basis][T01] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Mexico.
For parts discussed here, use the parts enquiry page.
[T01]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/Legales_Oferta_comercial_abril2026.pdf
[T06]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/fichas/nueva-gwm-tank500-ficha-tecnica.pdf
Related Academy Articles
Air Conditioning and Thermal Management
Electric A/C compressor oil: why a specified POE system cannot use a generic substitute
DENSO guidance for specified ND-oil 11 systems covers oil mixing and insulation risks. Refrigerant compatibility alone does not establish oil suitability.
Air Conditioning and Thermal Management
Battery chiller or cabin evaporator: clarify a repair order that only says cooler
Identify the system and heat-transfer media before ordering a cooler. Battery chillers and cabin evaporators perform different roles.
Air Conditioning and Thermal Management
2026 Tiggo 9 automatic defogging: a function name does not identify a humidity sensor
Australian MY26 Tiggo 9 lists Automatic Defogging. The function name does not establish sensor identity, heated glass or fault thresholds.