This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Restraints and airbags
2026 SEALION 5 rear seat belts: distinguish three-point belts, reminders and pretensioning
Australian MY26 SEALION 5 lists no rear belt pretensioning and load limiting. A rear seat-belt reminder does not establish pretensioner hardware.
A rear seat-belt reminder can lead an owner to ask whether a pretensioner is also fitted. Those features cannot be equated. The Australian 2026 SEALION 5 factory table lists reminders separately from pretensioning and load limiting. Before ordering a rear belt, identify the seat position and verified functions to avoid selecting from front-seat equipment.
The rear entry explicitly states not fitted
Both trims list front seat belts with pretensioning and load limiting, while the rear pretensioning and load-limiting row is marked not fitted. Front and rear belt reminders are both listed.[T11] A rear unfastened-belt warning therefore cannot establish a pretensioning function in the rear retractor, or justify applying the front-seat entry to the rear.
For damaged webbing, abnormal retraction or collision history, accurately record the seat and symptoms for the repairer to inspect. This equipment distinction is not a post-collision safety assessment and does not authorise repair, splicing or substitution of belt components.
Webbing appearance does not identify internal construction
The same colour or a similar latch plate does not prove belt suitability. The original table provides no exploded diagram of retractors, buckles, anchors or reminder-related components, and no complete belt replacement criteria. Actual replacement scope must follow the relevant service information and inspection results. [To be verified]
Scope and verification
This article covers only Australia; MY26; BYD SEALION 5; Essential DM-i and Premium DM-i. [Model-year and trim reference][T11] Factory equipment identifies functions and parts only; it is not a fault or replacement criterion.
No public data was available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Verify compatibility or interchangeability using the vehicle identification number (VIN) and local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
[T11]: https://bydautomotive.com.au/brochures/BYD-SEALION-5-2025.pdf
Related Academy Articles
Restraints and airbags
BYD DOLPHIN SRS warning: why the under-seat harness and retaining clips need checking together
Japan’s DOLPHIN Gai-3927 recall concerns pretensioner wiring and retaining clips under the front seats. Check scope before ordering an SRS module.
Restraints and airbags
BYD ATTO 3 child restraint recall: check anchor positions and the passenger airbag switch separately
The Australian ATTO 3 recall covers child restraint anchorage and the passenger airbag switch. Check both actions and restrictions before rectification.