This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Body Accessories
2026 POER Cargo-Bed Liner: Keep the 1520mm Bed Width Separate from Overall Vehicle Width
Distinguish the Mexican MY26 POER cargo-bed dimensions from vehicle width before checking liners, covers or mounting parts.
An enquiry for a cargo-bed liner that gives only overall vehicle width leaves the supplier without the right identification basis. For the reviewed Mexican 2026 POER Commercial Premium and Passenger Luxury 4x4, the factory sheets separately list cargo-bed dimensions. Separating bed dimensions from exterior body dimensions is the first step for this accessory requirement.
The factory provides a separate cargo-bed dimensions field
Both sheets list bed length, width and depth as 1520, 1520 and 540mm respectively. Overall commercial-version width is 1883mm, while passenger-version width is 1934mm. [T07][T08] These values describe different objects. Overall width cannot substitute for internal bed width, and width and depth must not be reversed.
For a liner, bed cover or local protective part, identify the installation area first, then add photographs inside the original bed, existing accessories and actual measurements. The factory's main dimensions do not detail wheel arches, edges, holes or fixing shapes. [To be verified]
Similar dimensions do not establish fitment
The sheet is not an accessory fitment drawing and provides no installation tolerances. A candidate also marked 1520mm cannot therefore be declared a universal liner, cover or bracket. Nor can these numbers determine drilling locations. Accessory construction and original vehicle identity still need complete checking. [To be verified]
Scope and verification
This article is limited to Mexico; MY26; GWM POER; Comercial Premium 6MT and Pasajeros Luxury 4x4 8AT. [Model year and trim basis][T01] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Mexico.
For parts discussed here, use the parts enquiry page.
[T01]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/Legales_Oferta_comercial_abril2026.pdf
[T07]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/fichas/v2/gwm-Poer-ficha-tecnica.zip
[T08]: https://www.gwm-mx.com/content/dam/gwm/pages/mx/es/pdf/fichas/v2/gwm-Poer-ficha-tecnica.zip
Related Academy Articles
Body accessories
2026 SEALION 5 roof rails: confirm Premium equipment before selecting crossbars
Only Australian MY26 SEALION 5 Premium lists roof rails. Separate factory rails from added crossbars and retain load and installation unknowns.
Body Accessories
2025 Cyberster Wind Deflector: identify the part between the seats separately from the roof
Australian MY25 Cyberster lists a Wind Deflector between the front seats. Specify its location and damage without assuming roof component requirements.
Body Accessories
2025 IM5 IM MAG Hub: distinguish magnetic attachment from USB power
Australian MY25 IM5 lists 4 IM MAG Hub points. Magnetic mounting, accessory identity and electrical compatibility require separate identification.