This content was compiled automatically and has not yet been reviewed by a technician. For reference only.

For reference only. Always confirm part numbers and procedures for your specific vehicle.

Fault diagnosis

Maxus eT9: reduced braking efficiency after heavy rain or muddy/snowy roads

Braking efficiency decreases noticeably after driving in heavy rain or on muddy or snowy roads.

By Funbyautoparts Editorial1 min read
Difficulty: IntermediateContent type: Diagnostic Guide

Maxus eT9: reduced braking efficiency after heavy rain or muddy/snowy roads

Symptoms

  • Braking efficiency decreases noticeably after driving in heavy rain or on muddy or snowy roads. [1]

Possible causes

  • The brake friction components are wet; ice or salt may accumulate on brake pads and discs in winter. [1]

Checks

  • Check whether this occurs under the wet-road conditions or winter ice/salt conditions above, and pay attention to braking performance. [1]

What to do

  • Maintain a safe following distance and, as instructed in the manual, apply the brakes lightly at intervals to dry the friction components and remove ice and salt. [1]

Applicability and limits

  • Only applies to the Wet state situation in the English eT9 manual on the Maxus Switzerland official website; do not use it to explain persistent braking abnormalities on dry roads. Scope: unknown [1]

Related part categories

  • Brake friction pads [1]
  • Brake discs [1]

Sources

[Source 1] SAIC MAXUS eT9 Driver’s Handbook (English edition from the Switzerland official website) — printed p.141; PDF p.149; Wet state (accessed 2026-10-30)
https://www.maxusmotors.ch/images/bedienungsanleitungen/DE/eT9-user%20manual-20241008-EN-compressed.pdf

Back to Academy

Related Academy Articles

Chat on WhatsApp