This content was compiled automatically and has not yet been reviewed by a technician. For reference only.

For reference only. Always confirm part numbers and procedures for your specific vehicle.

Fault diagnosis

Maxus eT9: EPS warning light after battery disconnection or severe discharge

The EPS warning light may come on after the battery is disconnected or severely discharged.

By Funbyautoparts Editorial1 min read
Difficulty: IntermediateContent type: Diagnostic Guide

Maxus eT9: EPS warning light after battery disconnection or severe discharge

Symptoms

  • The EPS warning light may come on after the battery is disconnected or severely discharged. [1]

Possible causes

  • EPS needs initialization after the battery is disconnected or severely discharged. [1]

Checks

  • Confirm the power-loss/discharged-battery circumstances and observe whether the EPS light goes out after initialization. [1]

What to do

  • Follow the manufacturer's procedure: turn the steering wheel fully left, then right, and finally return it to center to complete initialization. [1]

Applicability and limits

  • Only applies to the situation after power loss or severe battery discharge explicitly described in the English eT9 manual on the Maxus Switzerland official website; do not attribute EPS warning lights in general to this cause. Scope: unknown [1]

Sources

[Source 1] SAIC MAXUS eT9 Driver’s Handbook (English edition from the Switzerland official website) — printed p.140; PDF p.148; EPS system malfunction warning light (accessed 2026-10-30)
https://www.maxusmotors.ch/images/bedienungsanleitungen/DE/eT9-user%20manual-20241008-EN-compressed.pdf

Back to Academy

Related Academy Articles

Chat on WhatsApp