This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
OMODA 5: persistent metallic scraping or squealing during braking
Metallic scraping or squealing persists during braking.
OMODA 5: persistent metallic scraping or squealing during braking
Symptoms
- Metallic scraping or squealing persists during braking. [1]
Possible causes
- The brake friction linings may be severely worn. [1]
Checks
- Distinguish occasional operating sounds from persistent metallic scraping or squealing; have an authorized service center inspect immediately. [1]
What to do
- The manufacturer requires severely worn brake friction linings to be replaced immediately at an authorized service center. [1]
Applicability and limits
- Only applies to the braking system described in the official UK OMODA 5 Petrol manual; do not extend to E5. No year is stated. Scope: unknown [1]
Related part categories
- Brake friction linings [1]
Sources
[Source 1] OMODA 5 Petrol User Manual (official UK public edition) — printed p.149; PDF p.161; Precautions for brake system, item 3 (accessed 2026-10-30)
https://cdn.cworigin.com/omja/b08a4df1cd8217fc40e3041b72f0d4d22ade8628.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.