This content was compiled automatically and has not yet been reviewed by a technician. For reference only.

For reference only. Always confirm part numbers and procedures for your specific vehicle.

Fault diagnosis

BYD SEALION 6 engine repeatedly starts and stops when fuel is low

The engine repeatedly starts and stops when fuel is low or after refuelling following fuel exhaustion.

By Funbyautoparts Editorial1 min read
Difficulty: IntermediateContent type: Diagnostic Guide

BYD SEALION 6 engine repeatedly starts and stops when fuel is low

Symptoms

  • The engine repeatedly starts and stops when fuel is low or after refuelling following fuel exhaustion. [1]

Possible causes

  • Insufficient fuel causes repeated starting and stopping; this may also occur before the fuel supply line has filled after running out of fuel. [1]

Checks

  • Check fuel level, whether the vehicle has recently been refuelled after running out of fuel, and engine warnings on the instrument panel. [1]

What to do

  • Switch off and add the specified fuel according to the refuelling instructions; after refuelling following fuel exhaustion, normal operation resumes only once the fuel supply line is full. Contact BYD if an engine warning appears. [1]

Applicability and limits

  • New Zealand SEALION 6, 2024 DM manual edition; only applies to configurations with an engine. This does not establish a model year, and dictionary mapping has not been established. Scope: unknown [1]

Sources

[Source 1] BYD SEALION 6 Owner’s Manual NZ 2024 — printed pp.109–110, 223 / PDF pp.110–111, 224, Refueling / Engine Flameout During Driving (accessed 2026-10-30)
https://www.bydauto.co.nz/storage/uploads/388f4d01-1da6-4b8c-9525-76f9cda82157/BYD-SEALION-6-Owner%27s-Manual_NZ_2024_web.pdf

Back to Academy

Related Academy Articles

Chat on WhatsApp