This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
BYD ATTO 2 AC charging does not respond after scheduled charging is enabled
Scheduled or immediate charging fails to start after a schedule has been set.
BYD ATTO 2 AC charging does not respond after scheduled charging is enabled
Symptoms
- Scheduled or immediate charging fails to start after a schedule has been set. [1]
Possible causes
- Uncertified slow-charging equipment may not respond to the vehicle's scheduled charging function. [1]
Checks
- Check the scheduled charging switch; confirm whether the charging equipment is BYD-certified and supports vehicle-side scheduling. [1]
What to do
- Disable scheduled charging when using slow-charging equipment that has not been certified by BYD. [1]
Applicability and limits
- Official website ATTO 2 Asia-Pacific right-hand-drive manual; configuration depends on the actual vehicle, and model-year/powertrain dictionary mapping has not been established. Scope: unknown [1]
Sources
[Source 1] BYD ATTO 2 Owners Handbook (Asia-Pacific Right Rudder) — printed pp.84 / PDF pp.85, Reservation Charging (accessed 2026-10-30)
https://www.bydauto.co.nz/storage/uploads/5823db73-e953-4040-b059-8a7dd6d4237e/BYD-ATTO-2-Owners-Handbook-compressed.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.