This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
BYD ATTO 3 AC charging stops partway through
Charging has started but stops partway through.
BYD ATTO 3 AC charging stops partway through
Symptoms
- Charging has started but stops partway through. [1]
Possible causes
- Possible causes include a loose connection, loss of AC supply, battery overheating or a charging station fault. [1]
Checks
- Check the connection and power supply; check the instrument panel for overheating notifications and vehicle/charging station fault information. [1]
What to do
- Restore a secure connection. Wait for charging to resume automatically after power is restored; if it does not resume, unplug and reconnect. If overheating occurs, wait for cooling. Contact BYD service if the vehicle/charging station reports a fault. [1]
Applicability and limits
- New Zealand ATTO 3, 2022-08 manual edition, battery-electric; the manual date is not a model year, and dictionary mapping has not been established. Scope: unknown [1]
Sources
[Source 1] BYD ATTO 3 Owner’s Manual NZ 08/2022 — printed pp.83 / PDF pp.84, General Charging Faults and Solutions (accessed 2026-10-30)
https://www.bydauto.co.nz/storage/uploads/7b3bb839-014f-457f-9f95-45118e270e00/ATTO-3-Owner%27s-Manual-NZ-08_2022.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.