This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Changan CS55 PLUS: Water marks or smears remain after cleaning the wipers
Wipers leave water marks or smears even after the glass and rubber blades have been cleaned.
Changan CS55 PLUS: Water marks or smears remain after cleaning the wipers
Symptoms
- Wipers leave water marks or smears even after the glass and rubber blades have been cleaned. [1]
Possible causes
- The manual distinguishes foreign-matter contamination from worn or damaged rubber blades that still leave smears after cleaning. [1]
Checks
- With the vehicle shut down, check the glass and rubber blades for contamination and clean them first; if wiping is still ineffective after cleaning, check the rubber blades for wear or damage. [1]
What to do
- If wear or damage to the rubber blades is confirmed, replace the wiper blades according to the actual vehicle specifications; rule out contamination before this is confirmed. [1]
Applicability and limits
- Official Russian-language owner's manual for Russia; CS55 PLUS; model years are not specified, and no actual vehicle model has been linked. Scope: unknown [1]
- The cover and body identify CS55PLUS; the PDF metadata title incorrectly says CS95. The body takes precedence
- The preface date June 2021 is not treated as an applicable model year; do not extend to the first-generation CS55 or different generations of CS55PLUS
Related part categories
- Wipers / Front windscreen wiper blades / Windscreen cleaning [1]
Sources
[Source 1] CHANGAN CS55PLUS Russian-language Owner's Manual (preface dated June 2021) — PDF pp.265 / printed pp.265, Стеклоочистители / Проверка щеток стеклоочистителя (accessed 2026-11-01)
https://changanauto.ru/storage/model/manual/FHUuursBRb7sqRJze5U745jYBuMdJond1E6uYpc6.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.