This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Changan CS55 PLUS: Abnormal noise during sunroof operation; check seal contact areas
Abnormal noise occurs when opening or closing the sunroof.
Changan CS55 PLUS: Abnormal noise during sunroof operation; check seal contact areas
Symptoms
- Abnormal noise occurs when opening or closing the sunroof. [1]
Possible causes
- The sunroof maintenance section of the manual requires checking the seals and abnormal operating noises, with wiping and lubrication if necessary. Retain only this inspection direction; do not claim damaged seals or a motor or guide rail fault. [1]
Checks
- Inspect the sunroof seals and contact areas. Clean as required for the actual vehicle, lubricate if necessary and recheck the noise. Do not guess the lubricant composition. [1]
What to do
- Recheck after cleaning and appropriate treatment. Have the repairer diagnose persistent abnormal noise; do not replace an assembly based on noise alone. [1]
Applicability and limits
- Official Russian-language owner's manual for Russia; CS55 PLUS; model years are not specified. No actual vehicle model has been linked. Scope: unknown [1]
- The cover and body identify CS55PLUS; the PDF metadata title incorrectly says CS95. The body takes precedence
- The preface date June 2021 is not treated as an applicable model year; do not extend to the first-generation CS55 or different generations of CS55PLUS
Related part categories
- Body parts / Sunroof seals / Sunroof mechanism [1]
Sources
[Source 1] CHANGAN CS55PLUS Russian-language Owner's Manual (preface dated June 2021) — PDF pp.250 / printed pp.250, уплотнители люка / шум при работе люка (accessed 2026-11-01)
https://changanauto.ru/storage/model/manual/FHUuursBRb7sqRJze5U745jYBuMdJond1E6uYpc6.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.