This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Chery TIGGO 7 PRO: Persistent metallic rubbing or prolonged squealing during braking
Persistent metallic rubbing or prolonged squealing occurs during braking.
Chery TIGGO 7 PRO: Persistent metallic rubbing or prolonged squealing during braking
Symptoms
- Persistent metallic rubbing or prolonged squealing occurs during braking. [1]
Possible causes
- The manual associates these persistent noises with severe brake pad wear and distinguishes them from ordinary brief noises. [1]
Checks
- Have the repairer confirm brake pad wear and the noise source as soon as possible. [1]
What to do
- After confirming wear, replace and inspect according to the actual vehicle configuration; do not indiscriminately replace parts for every brake noise. [1]
Applicability and limits
- Russian-language manual archived on the official Chery brand website for Russia; model TIGGO 7 PRO; applicable model years are not specified. Applicability to the actual powertrain and configuration needs to be checked. Scope: unknown [1]
- The official website archive entry explicitly identifies Tiggo 7 PRO; version identifier T1E0M20CNGLCHEN01
- Only applies to the configurations described in this combustion-engine vehicle manual; applicable model years are not specified
Related part categories
- Brake pads / Brake pads / Braking system [1]
Sources
[Source 1] CHERY TIGGO 7 PRO Official Russian-language Owner's Manual (archived model) — PDF pp.203 / printed pp.193, Пользование тормозной системой / Меры предосторожности (accessed 2026-11-01)
https://1.cdn.perxis.ru/originals/cak9heieibkpivcnavb0/original
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.