This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Changan CS75 PLUS: Oil pressure warning light stays on after starting or comes on while driving
The oil pressure warning light stays on after starting or illuminates while driving.
Changan CS75 PLUS: Oil pressure warning light stays on after starting or comes on while driving
Symptoms
- The oil pressure warning light stays on after starting or illuminates while driving. [1]
Possible causes
- The manual lists insufficient oil pressure or a lubrication system fault and requires stopping the engine and checking the engine oil level. [1]
Checks
- Immediately stop safely and switch off the engine; follow this version's oil level check requirements and contact a qualified technician. [1]
What to do
- Repair according to the confirmed cause; the light's status alone does not establish oil pump or engine assembly damage. [1]
Applicability and limits
- Only applies to the corresponding CS75 PLUS configuration in the Russian-language CS75plus manual from the official Russian website, revised June 2024; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Fluids / Engine oil / Engine lubrication [1]
Sources
[Source 1] CHANGAN CS75plus Official Russian-language Owner's Manual (revised June 2024) — PDF pp.73 / printed pp.71, Индикатор давления масла; pp.191 / printed pp.189, Масло в двигателе (accessed 2026-11-01)
https://changanauto.ru/storage/model/manual/WSgnpgLSAb6KH8FbBDMEjFC1KkjFveFgUSeRPynd.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.