This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Changan CS75 PLUS: Sticking or squeaking door or window seals
Sticking or squeaking occurs around the seals when opening or closing doors or windows.
Changan CS75 PLUS: Sticking or squeaking door or window seals
Symptoms
- Sticking or squeaking occurs around the seals when opening or closing doors or windows. [1]
Possible causes
- The manual requires lubricating rubber seals to reduce sticking and squeaking; it does not confirm door lock or hinge damage. [1]
Checks
- Confirm that the noise comes from the seals, check contamination and contact areas, and maintain according to the manufacturer's instructions. [1]
What to do
- Clean and lubricate according to the actual vehicle's requirements; investigate and repair persistent abnormalities further. Do not directly replace the door lock. [1]
Applicability and limits
- Only applies to the corresponding CS75 PLUS configuration in the Russian-language CS75plus manual from the official Russian website, revised June 2024; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Body parts / Door and window seals / Body sealing [1]
- Fluids / Silicone-based seal lubricant / Body seal maintenance [1]
Sources
[Source 1] CHANGAN CS75plus Official Russian-language Owner's Manual (revised June 2024) — PDF pp.183 / printed pp.181, Уход за элементами кузова (accessed 2026-11-01)
https://changanauto.ru/storage/model/manual/WSgnpgLSAb6KH8FbBDMEjFC1KkjFveFgUSeRPynd.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.