This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Changan CS75 PLUS: Persistent metallic scraping noise during braking
A metallic noise occurs during braking as the wear indicator contacts the brake disc.
Changan CS75 PLUS: Persistent metallic scraping noise during braking
Symptoms
- A metallic noise occurs during braking as the wear indicator contacts the brake disc. [1]
Possible causes
- The manual explicitly states that the brake pads have wear indicators and that this metallic noise requires prompt inspection and replacement. [1]
Checks
- Have a qualified technician confirm whether the wear indicator is responsible and check the discs and pads; sound alone cannot rule out other braking problems. [1]
What to do
- After confirming wear, repair according to the actual vehicle's requirements; do not continue using worn brake pads. [1]
Applicability and limits
- Only applies to the corresponding CS75 PLUS configuration in the Russian-language CS75plus manual from the official Russian website, revised June 2024; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Brake pads / Brake pads / Braking system [1]
- Braking system / Brake disc / Braking system [1]
Sources
[Source 1] CHANGAN CS75plus Official Russian-language Owner's Manual (revised June 2024) — PDF pp.152 / printed pp.150, Передние и задние дисковые тормоза (accessed 2026-11-01)
https://changanauto.ru/storage/model/manual/WSgnpgLSAb6KH8FbBDMEjFC1KkjFveFgUSeRPynd.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.