This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Geely Coolray: Wiper judder, noise or streaks and unwiped areas
The wipers judder or make noise, or the wiper rubbers are hardened, cracked or leave streaks.
Geely Coolray: Wiper judder, noise or streaks and unwiped areas
Symptoms
- The wipers judder or make noise, or the wiper rubbers are hardened, cracked or leave streaks. [1]
Possible causes
- The manual states that contamination, wax/coatings and wiper rubber damage affect wiping. [1]
Checks
- Check the glass and wiper rubbers for contamination, hardening or cracking; operate in service mode. [1]
What to do
- Clean first; replace the wiper blades to the actual vehicle's specification only after damage is confirmed or cleaning proves ineffective. [1]
Applicability and limits
- Only applies to the corresponding Coolray configuration in the Spanish-language COOLRAY SX11 manual from the official Chilean website; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Wipers / Front windscreen wiper blades / Windscreen cleaning [1]
Sources
[Source 1] GEELY COOLRAY SX11 Spanish-language Owner's Manual from the Official Chilean Website — PDF pp.233–234 / printed pp.231–232, Escobillas limpiaparabrisas (accessed 2026-11-01)
https://www.geely.cl/content/uploads/2024/10/SX11-Coolray-_compressed.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.