This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Geely Coolray: Sunroof sunshade noise or difficult movement after force was applied
The sunshade was forcibly pushed or pressed, followed by noise, detachment or difficulty moving.
Geely Coolray: Sunroof sunshade noise or difficult movement after force was applied
Symptoms
- The sunshade was forcibly pushed or pressed, followed by noise, detachment or difficulty moving. [1]
Possible causes
- The manual explicitly states that forcible pushing or pressing can cause the sunshade to detach, make noise or become difficult to move. [1]
Checks
- Confirm that the affected part is the sunshade rather than the glass sunroof; stop forcing it and have a qualified technician inspect its installation. [1]
What to do
- Repair according to the inspection results; do not directly replace the sunroof motor before confirmation. [1]
Applicability and limits
- Only applies to the corresponding Coolray configuration in the Spanish-language COOLRAY SX11 manual from the official Chilean website; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the described situation where external force was applied to the sunshade; do not use this entry to assess normal wind noise when fully open.
Related part categories
- Body parts / Sunroof sunshade assembly / Sunroof mechanism [1]
Sources
[Source 1] GEELY COOLRAY SX11 Spanish-language Owner's Manual from the Official Chilean Website — PDF pp.68 / printed pp.66, Parasol del techo solar (accessed 2026-11-01)
https://www.geely.cl/content/uploads/2024/10/SX11-Coolray-_compressed.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.