This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Geely Coolray: Large amounts of droplets, water marks or pooled water in headlamps
Large amounts of droplets, water marks or pooled water are present inside a lamp, rather than brief light misting.
Geely Coolray: Large amounts of droplets, water marks or pooled water in headlamps
Symptoms
- Large amounts of droplets, water marks or pooled water are present inside a lamp, rather than brief light misting. [1]
Possible causes
- The manual explicitly states that these conditions exceed normal light misting and generally involve water ingress into the lamp. [1]
Checks
- Distinguish normal misting caused by temperature differences from widespread droplets or pooled water; have a service provider inspect the lamp. [1]
What to do
- Identify the cause before repairs; do not replace a lamp directly because of brief misting. [1]
Applicability and limits
- Only applies to the corresponding Coolray configuration in the Spanish-language COOLRAY SX11 manual from the official Chilean website; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Lighting / Headlamp assembly / Lighting [1]
Sources
[Source 1] GEELY COOLRAY SX11 Spanish-language Owner's Manual from the Official Chilean Website — PDF pp.229–230 / printed pp.227–228, Empañamiento de las luces combinadas delanteras (accessed 2026-11-01)
https://www.geely.cl/content/uploads/2024/10/SX11-Coolray-_compressed.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.