BYD ATTO 3: Poor wiping; check for contamination and wiper rubber damage

BYD ATTO 3: Poor wiping; check for contamination and wiper rubber damage

Symptoms

• The wipers do not wipe cleanly, or the wiper rubber surfaces are contaminated or damaged. ^[1]

Possible causes

• The manual states that grease, wax, sand and dust can affect or damage the wiper rubbers. ^[1]

Checks

• Check the glass and wiper rubbers for contamination, hard debris and damage; enter the appropriate service mode before lifting the arms. ^[1]

What to do

• Clean as instructed in the manual and service or replace the wiper rubbers to the actual vehicle's specification; do not directly conclude that the wiper motor has failed. ^[1]

Applicability and limits

• Only applies to the corresponding ATTO 3 configuration in the New Zealand English-language owner's manual; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown ^[1]
• Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.

Related part categories

• Wipers / Front windscreen wiper blades / Windscreen cleaning ^[1]

Sources

[Source 1] BYD ATTO 3 Owner’s Manual NZ 08/2022 — PDF pp.170–171 / printed pp.169–170, Wiper Blades (accessed 2026-11-01)
https://www.bydauto.co.nz/storage/uploads/7b3bb839-014f-457f-9f95-45118e270e00/ATTO-3-Owner%27s-Manual-NZ-08_2022.pdf