This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
BYD ATTO 3: Persistent vibration at high speed or abnormal tyre wear
Persistent vibration occurs at high speed but is less noticeable at low speed, or uneven tyre wear is present.
BYD ATTO 3: Persistent vibration at high speed or abnormal tyre wear
Symptoms
- Persistent vibration occurs at high speed but is less noticeable at low speed, or uneven tyre wear is present. [1]
Possible causes
- The manual requires tyre checks for the high-speed vibration described above and links abnormal wear to wheel alignment checks. [1]
Checks
- Check tyre pressures, damage, wear and wheel balance/alignment; stop safely first if the abnormality is pronounced. [1]
What to do
- Have a qualified technician make corrections based on the test results; a tyre check does not establish a steering rack failure. [1]
Applicability and limits
- Only applies to the corresponding ATTO 3 configuration in the New Zealand English-language owner's manual; the manual date is not treated as an applicable model year. No actual vehicle model has been linked. Do not extend to vehicles with the same model name, other powertrains or other markets. Scope: unknown [1]
- Only applies to the specific configuration in the cited manual; do not assume applicability to all vehicles with the same model name.
Related part categories
- Wheel and tyre parts / Tyres and wheels / Wheels and tyres [1]
Sources
[Source 1] BYD ATTO 3 Owner’s Manual NZ 08/2022 — PDF pp.171–172 / printed pp.170–171, Tires / Maintenance (accessed 2026-11-01)
https://www.bydauto.co.nz/storage/uploads/7b3bb839-014f-457f-9f95-45118e270e00/ATTO-3-Owner%27s-Manual-NZ-08_2022.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.