This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
BYD SEAL: Reduced A/C cooling with obstructed airflow over radiator and condenser surfaces
A/C cooling efficiency is reduced; leaves, insects and dust may have accumulated on the heat-exchange surfaces.
BYD SEAL: Reduced A/C cooling with obstructed airflow over radiator and condenser surfaces
Symptoms
- A/C cooling efficiency is reduced; leaves, insects and dust may have accumulated on the heat-exchange surfaces. [1]
Possible causes
- The manual explains that deposits on the front surfaces can obstruct airflow and reduce cooling performance. [1]
Checks
- Inspect the radiator and condenser surfaces according to the manual; work inside the refrigeration system must be left to a qualified service provider. [1]
What to do
- Clear surface blockages and retest; if cooling remains insufficient, have the system inspected and repaired. Do not directly conclude that the compressor is damaged or add refrigerant without diagnosis. [1]
Applicability and limits
- Only applies to the BYD SEAL configuration in the source; model year unconfirmed; the vehicle model database is empty and no model is linked. Do not extend to other models. Scope: unknown [1]
Related part categories
- Cooling system / Cooling radiator / Cooling system [1]
- A/C system / A/C condenser / A/C refrigeration [1]
Sources
[Source 1] BYD SEAL Owner’s Manual NZ 11/2023 — PDF p.177 / printed p.176, A/C System (accessed 2026-11-01)
https://www.bydauto.co.nz/storage/uploads/584dac99-9035-4e65-9354-42c1b8162793/BYD-SEAL-OWNER%E2%80%98s-MANUAL-NZ_11_2023_web.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.