This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
MAXUS DELIVER 9: Uneven tyre wear
The tyre tread shows uneven or abnormal wear.
MAXUS DELIVER 9: Uneven tyre wear
Symptoms
- The tyre tread shows uneven or abnormal wear. [1]
Possible causes
- The manual lists contributing factors including incorrect tyre pressure, poor alignment or wheel balance, emergency braking and cornering. [1]
Checks
- Check for tyre and sidewall damage and check cold tyre pressures; have a qualified technician check alignment and wheel balance. Do not apply the same pressure to all configurations. [1]
What to do
- Adjust pressures according to this vehicle's tyre pressure label and carry out alignment/wheel balancing and rotation based on inspection; replace tyres with exposed cords, bulges or severe damage as instructed in the manual. [1]
Applicability and limits
- Source limits: MAXUS DELIVER 9, model year 2024, English-language material from the official Swiss website; 24MY; front/rear wheels and single/dual rear-wheel configurations are subject to the actual vehicle label and manual limits. For inspection guidance only; related parts do not constitute a recommendation to replace them. No vehicle model is linked; do not assume applicability to other models of the same brand. Scope: unknown [1]
- 24MY; front/rear wheels and single/dual rear-wheel configurations are subject to the actual vehicle label and manual limits
Related part categories
- Tyres and wheels [1]
Sources
[Source 1] SAIC MAXUS DELIVER 9 24MY User Manual — PDF pp.212–214 / printed pp.204–206, Tires / Tire check and rotation (accessed 2026-11-01)
https://www.maxusmotors.ch/images/bedienungsanleitungen/DE/DELIVER9-24MY%20User%20Manual_compressed.pdf
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.