This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Fault diagnosis
Chery TIGGO 7 PRO: Individual electrical function fails; check the corresponding fuse
An electrical device does not work; check whether the fuse for its circuit has blown.
Chery TIGGO 7 PRO: Individual electrical function fails; check the corresponding fuse
Symptoms
- An electrical device does not work; check whether the fuse for its circuit has blown. [1]
Possible causes
- The manual states that a blown corresponding fuse should be considered when electrical equipment does not work; this alone does not establish damage to the device itself or its controller. [1]
Checks
- A qualified technician should switch off the ignition and disconnect power as required for this vehicle, then check the corresponding fuse against the diagram on the actual fuse box cover; do not use circuit numbers or ratings from other models. [1]
What to do
- Once a blown fuse is confirmed, address it using the original specification and recheck operation; do not alter the fuse structure or substitute wire for a fuse. Persistent abnormalities require further inspection and repair. [1]
Applicability and limits
- Russian-language manual archived on the official Chery Russia website; TIGGO 7 PRO; model year unspecified, with no actual vehicle model or main brand ID linked. Scope: unknown [1]
- The official archive labels the model as Tiggo 7 PRO; the body version is T1E0M20CNGLCHEN01
- Do not extend to PRO MAX, e+ or plug-in hybrids; applicable model year unspecified
Related part categories
- Low-voltage system / Automotive fuses / Electrical protection [1]
Sources
[Source 1] CHERY TIGGO 7 PRO official Russian-language owner manual (archived model) — PDF pp.263–264 / printed pp.253–254, 6-4 Предохранители / Проверка и замена предохранителей (accessed 2026-11-01)
https://1.cdn.perxis.ru/originals/cak9heieibkpivcnavb0/original
Related Academy Articles
Fault diagnosis
Rough idle: electronic EGR valve sticking inspection clues
The engine idles roughly (rough idling) or hesitates during acceleration.
Fault diagnosis
Engine stalls or enters emergency mode: airflow meter inspection clues
The engine stalls or the control unit enters an emergency program, possibly with the engine warning light on.
Fault diagnosis
Charging indicator does not light with ignition on and engine stopped
The ignition is switched on and the engine is not yet running, but the charging/battery indicator does not light.