This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Climate Control and Thermal Management
2025 HS Hybrid+ rear vents do not establish dual-zone air conditioning on every trim
Australian MY25 HS Hybrid+ has rear vents on both trims, but only Essence lists dual-zone climate control. Keep vent and control identities separate.
A rear passenger says it is not cool enough. Seeing rear vents, someone starts looking for a rear air conditioning unit. For the Australian MY25 HS Hybrid+, checking climate-zone equipment first helps avoid treating vent location as evidence of a separate air conditioning system or a particular actuator.
Vents and dual-zone control have separate table entries
Hybrid+ Excite and Essence both list Rear AC Vent and Auto AC Control, while only Essence lists Dual Zone Auto Climate Control as fitted.[Manufacturer Hybrid+ equipment][Q11] Rear vents therefore do not establish identical climate-zone control on both trims.
This article uses only the Hybrid+ section of the consolidated brochure. It does not combine petrol or Super Hybrid tables into the same vehicle.
Describe airflow, temperature and settings separately
At intake, record the vent location, actual settings, the row where comfort fell short and any warnings. This gives the technician more to investigate than “rear air conditioning broken”.
The equipment table alone cannot identify a flap, motor, duct or other cause from these observations. Zone names also do not disclose actuator count or mounting arrangements. [To be verified]
Similar panels and vents do not establish identical control parts
Retain the complete Hybrid+ and Excite/Essence identity during procurement. Similar vent appearance does not establish interchangeability of panels, flaps or air conditioning assemblies. “Rear vent” also cannot supply an unconfirmed independent rear air conditioning system. [To be verified]
Scope and verification
This article covers only Australian MY25 MG HS: Hybrid+ Excite and Hybrid+ Essence. The cited feature and equipment information is not a fault or replacement criterion.[Scope reference][Q11]
No public data was available in the reviewed material for climate-zone control implementation, flap/actuator count, separate rear air conditioning structure or component breakdown; repair parameters, fault and replacement criteria, OE numbers, separate parts availability or interchangeability. [To be verified] Check compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
[Q11]: https://mgmotor.com.au/brochures/MG_HS_CONSOLIDATED_2026.pdf
Related Academy Articles
Climate Control and Thermal Management
2025 IM5 heat pump parts: match the 400V or 800V entry to the trim
The Australian MY25 IM5 heat pump entry varies by trim. Preserve the system identity without treating voltage labels as component ratings or test values.
Climate Control and Thermal Management
2025 IM5 air vent parts: distinguish front hidden vents from rear vents
Separate front and rear Australian MY25 IM5 vents, trim damage and control concerns. “Independent” does not establish a separate rear air conditioning unit.
Climate Control and Thermal Management
2025 IM5 Cold & Warm Box: identify it separately from the vehicle air conditioning
Identify the Australian MY25 IM5 Intelligent Cold & Warm Box without assuming its cooling design or treating it as an air conditioning assembly.