This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Braking System
2025 IM6 BDW: Brake Disc Washing does not identify a washer pump part
Australian MY25 IM6 lists Brake Disc Washing. The function name does not establish a separate pump, activation conditions or disc and pad wear criteria.
Seeing “Brake Disc Washing” in an IM6 equipment table and immediately searching for a washer pump or pipework may send the parts search in the wrong direction. For Australian MY25 vehicles, first identify BDW as a published braking function rather than an unverified component.
The table lists Brake Disc Washing
All three trims list Brake Disc Washing (BDW) under safety functions.[Manufacturer table][Q06] The name can be confirmed, but the table does not explain operating steps, activation conditions or internal implementation. [To be verified]
It therefore neither identifies a separate washer pump nor establishes that particular internal hardware is absent. A public equipment list is not a system diagram.
Record disc and pad procurement separately
If the main requirement is brake disc or pad inspection/replacement, retain professional inspection findings and the specific location. For function warnings or other brake concerns, separately record warnings, conditions and service records rather than saying only “BDW did not clean properly”.
These details help direct intake; disc surface appearance or a single braking impression cannot diagnose BDW failure. The brochure also provides no wear thickness or maintenance interval. [To be verified]
A function name does not make discs and pads maintenance-free
A BDW listing does not remove the need to inspect discs and pads, nor explain every braking noise or performance change. Procurement should follow the confirmed repair item. An abbreviation cannot supply a washing device, replacement list or control test procedure.
Scope and verification
This article covers only Australian MY25 MG IM6: Premium 75, Platinum 100 RWD and Performance 100 AWD. The cited feature and equipment information is not a fault or replacement criterion.[Scope reference][Q06]
No public data was available in the reviewed material for BDW implementation, activation conditions, controlled items or test standards; brake component inspection/replacement limits, repair parameters, OE numbers, separate parts availability or interchangeability. [To be verified] Check compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
Related Academy Articles
Braking System
2026 Tiggo 4 red brake calipers: colour does not identify pistons or pads
MY26 Australia petrol Tiggo 4 Urban and Ultimate list red calipers. Separate paint colour from caliper construction and brake-pad identity.
Braking System
OMODA 5 ABS warning after tyre work: is the wheel-speed sensor definitely faulty?
Check wheel-speed signals, wiring and encoder components after wheel-end work, and distinguish ABS faults from tyre-pressure warnings.
Braking System
OMODA 5 brake-fluid leakage: check the pipe union identified in the recall
Australia REC-005891 concerns brake-pipe union fastening. Check the official VIN list and inspection findings before deciding on replacement.