This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Software and control systems
2025 EX5 V2L menu: a factory update renamed it Power Share–Device
Australian MY25 EX5 Flyme Auto S 1.1.7 records a V2L label change to Power Share–Device. Check menu and version before specifying hardware.
After an update, failure to find the remembered V2L label can suggest that external power supply has disappeared and prompt a search for control parts. For the Australian MY25 EX5, checking the factory's historical label change helps avoid reporting a menu question directly as hardware failure.
A factory example of function-label refinement
The Flyme Auto S 1.1.7 notice dated Aug 18, 2025 explicitly covers MY25 Complete and Inspire. Item 3 uses Vehicle to Load = Power Share–Device as an example of improved function naming.[Factory software notice][R33]
This confirms the label explanation for that version. It does not introduce another external power-supply hardware set or state that output power, interfaces or adapters changed with the name. The Power Share wording alone does not establish an accessory with a different specification. [To be verified]
Record menus, version and actual power supply separately
Retain the currently visible vehicle version, related pages and original messages. Explain whether the issue is simply finding a name or a separate symptom during use. Keep these requirements distinct rather than treating a remembered menu label as proof of a vehicle fault.
File the current software version, page screenshots and actual power-supply behaviour separately, retaining the historical name change as a search clue. If the repairer confirms a parts requirement, check the specific component and original identity. The menu name should not decide the inspection result in advance.
Scope and verification
This article covers only Australia, MY25 Geely EX5, Complete and Inspire.[Model-year scope][R33] The software notice applies only to the described historical version and does not establish the vehicle's current installation or update eligibility.
No public data was available in the reviewed material for the vehicle's current menus and version, operating conditions, external power accessory fitment, power or hardware changes; OE numbers, service parameters, separate parts availability or compatibility and interchangeability. [To be verified] Verify compatibility or interchangeability using the VIN and local Australian manufacturer parts catalogue.
For the parts discussed here, use the parts enquiry page.
[R33]: https://a-ap.storyblok.com/f/3000753/x/c5d68aee12/ota-update_ex5_aug-25.pdf
Related Academy Articles
Software and Control Systems
2026 Tank 300 Crawl Control Disengagement: Retain Overheat Messages Before Ordering a Controller
Record MY26 Tank 300 Luxury Crawl Control conditions and overheat warnings before drawing a component-replacement conclusion.
Software and control systems
2025—2026 EX5 low-speed alert sound: check software and tone before replacing the sounder
Australian EX5 S 1.2.0 added AVAS tone choices. Separate pedestrian alerts, drive-mode confirmation sounds and diagnosed hardware requirements.
Software and control systems
2026 EX5 surround-view pop-ups and phone projection: check software display behaviour
Australian EX5 1.3.0 describes configured surround-view pop-ups without shrinking phone projection. Separate interface changes from camera faults.