This content was compiled automatically and has not yet been reviewed by a technician. For reference only.
For reference only. Always confirm part numbers and procedures for your specific vehicle.
Air Conditioning and Thermal Management
2026 Chery E5 Heat Pump: identify thermal-management parts before naming a coolant pump
MY26 Australia Chery E5 Ultimate lists Heat Pump. Distinguish that system identity from a liquid-circulation pump and its individual parts.
2026 Chery E5 Heat Pump: identify thermal-management parts before naming a coolant pump
An enquiry copies Heat Pump from English information, but the request becomes a coolant-pump replacement when passed on. For the Australia MY26 Chery E5 Ultimate, distinguish a heat pump from a liquid-circulation pump at the start to avoid identifying the wrong thermal-management item.
Heat Pump is confirmed; internal circuits need separate checks
Factory page 3 explicitly lists Heat Pump. Page 1 and the final page define the information as MY26 Ultimate. [Factory technical table][S06] This confirms heat-pump equipment identity; extracting Pump alone does not produce a confirmed water-pump part number.
Cabin temperature experience, battery-temperature messages and the part located by the repairer are also different levels of information and should be retained separately at service intake.
Specify heating, cooling or the original message first
Record the function in use, visible settings, original vehicle messages and changes before and after repair. If only a subjective feeling of insufficient warmth or cooling is known, describe it accurately rather than selecting a valve, compressor or circulation pump in advance.
When a parts requirement is established, link the findings to the specific item and original-part markings. Its description can retain the Heat Pump system association, but the purchase should concern an identified physical item. Verify the circuit and supply scope against the applicable information.
Scope and verification
This article is limited to Australia; MY26; Chery E5; Ultimate. [Model year and configuration][S06] Factory equipment information identifies functions and parts; it is not a fault or replacement criterion.
No public data were available in the reviewed material for heat-pump circuits, refrigerant and lubricant, valve-group and pump construction, and repair and replacement criteria; OE numbers, repair parameters, separate parts availability or compatibility and interchangeability. [To be verified] Compatibility or interchangeability must be checked using the vehicle identification number (VIN) and the local factory parts catalogue in Australia.
For parts discussed here, use the parts enquiry page.
Related Academy Articles
Air Conditioning and Thermal Management
Electric A/C compressor oil: why a specified POE system cannot use a generic substitute
DENSO guidance for specified ND-oil 11 systems covers oil mixing and insulation risks. Refrigerant compatibility alone does not establish oil suitability.
Air Conditioning and Thermal Management
Battery chiller or cabin evaporator: clarify a repair order that only says cooler
Identify the system and heat-transfer media before ordering a cooler. Battery chillers and cabin evaporators perform different roles.
Air Conditioning and Thermal Management
2026 Tiggo 9 automatic defogging: a function name does not identify a humidity sensor
Australian MY26 Tiggo 9 lists Automatic Defogging. The function name does not establish sensor identity, heated glass or fault thresholds.