2025 ATTO 3 ambient lighting: check Premium for multicolour and music-linked functions

When replacing lighting during an interior repair, it can be tempting to fit any colour-changing strip as a universal ATTO 3 part. Australian MY25 Premium also has factory multicolour gradient and music-linked functions to preserve. A similar colour does not establish part identity.

Both factory entries apply only to Premium

Multicolour gradient ambient lighting and the related music rhythm synchronisation entry are fitted to Premium; Essential has neither feature.[Factory equipment][Q16] This article confirms only that equipment scope, without extending it to vehicles with the same name in every market.

The table does not specify strip locations, quantities or control architecture. “Music synchronisation” does not establish a part number for a separate module. [To be verified]

Describe trim damage and lighting complaints separately

If trim damage is the main issue, identify the installation location. If the lighting does not behave as expected, record settings, observations, messages and repair results. “Does not change colour” alone is insufficient to decide to replace a strip or control component.

The product table provides no activation or test criteria for synchronisation, so a single use cannot establish normal operation or failure. [To be verified]

A universal colour-changing strip does not establish a factory function match

Select parts against the vehicle's equipment and the diagnosed component. Matching colour, visible length or music response does not establish connection or control compatibility. This article provides no retrofit, rewiring or coding instructions and does not interpret Premium equipment as a direct upgrade for Essential.

Scope and verification

This article covers only Australian MY25 BYD ATTO 3, Premium; excluding Essential. The cited function and equipment information is not a fault or replacement criterion.[Scope reference][Q16]

No public data was available in the reviewed material for strip quantities or locations, control architecture, connections, colours and synchronisation settings; repair parameters, fault and replacement criteria, OE numbers, separate parts availability or interchangeability. [To be verified] Verify compatibility or interchangeability using the VIN and the local Australian manufacturer parts catalogue.

For the parts discussed here, use the parts enquiry page.

[Q16]: https://bydautomotive.com.au/brochures/BYD-ATTO-3-2026.pdf?v=3